THE MULLET gets NEW ENGINE!!

FastIndy
FastIndy

If you're curious about what he's welding on the cylinder head, it's the individual exhaust rocker stands to the one-piece intake rocker stand. This adds rigidity to the rockers.

Vor Monat
Sessh _
Sessh _

I’m actually curious why he went this route and not the SMX route? I think he wanted a capable big block in time for Midwest drags and I think this engine is probably quite a bit cheaper than an SMX. I know Steve likes his 1 piece rocker stands opposed to the way Jessel does it but I think he has a good fix welding those sole exhaust rockers stands to the one piece intake stands.

Vor 21 Tag
HazMatt Container
HazMatt Container

@Danny R Turns out, they were...

Vor Monat
Denver Kenyon
Denver Kenyon

Thanks!

Vor Monat
Intellistan
Intellistan

Thank you

Vor Monat
theblackmech
theblackmech

@andrew phillips pump fuel, as its what the street set of injectors and tune up is for

Vor Monat
bob mencel
bob mencel

I was hoping this would happen ; saw Cleetus' video earlier today. This is going to be just what Mullet needs. Great to see you guys working together. Thanks Steve .

Vor Monat
Cruz Benitez
Cruz Benitez

@ade 1772.

Vor 21 Tag
Brandon Searle
Brandon Searle

Agreed

Vor Monat
billy jackson
billy jackson

@Mike Barton but the one i really want to make a come back most of it the dale truck

Vor Monat
billy jackson
billy jackson

@Mike Barton lol yeah the way bounces around in the videos does get a little confusing sometimes

Vor Monat
Mike Barton
Mike Barton

@billy jackson Oh that's right. I had just finished watching that video about Leroy getting chopped to fit the engine. For some reason I thought it was the same motor.

Vor Monat
Iain Ball
Iain Ball

Steve Morris racing engines + cleetus mcfarland = YouTube perfection. This is going to be a ride !!!!

Vor Monat
Quake Masta
Quake Masta

Can't wait to see it in action. This is bringing me back to the days of leroy and ruby getting better and better stuff over time. Love to see the level up.

Vor Monat
For The Win
For The Win

You just took cleetus to the upper stratosphere of drag racing!!

Vor Monat
Michael Krenkel
Michael Krenkel

@Leslley Scotte they have recently run multiple 7.0's and a 6.99 on Midwest dragweek

Vor 21 Tag
Skyes professional 5ho
Skyes professional 5ho

So probably a stupid question but did mullet get the sml or smx engine?

Vor 24 Tage
charlies hammer
charlies hammer

@The Bogner Unfortunately they spent a large amount of $ and have not been able to back it up, this will save them money in the long run. They spent a ton of cash to run one 6.9 and I have loved every minute.

Vor Monat
GRPABT1
GRPABT1

Everyone seems to forget Mullet is still on 275 radials. Radial cars don't go fast without good glue. Cleetus travels to events which run street car classes and don't have proper radial prep. To expect 6's every time is stupid.

Vor Monat
Trollman3555
Trollman3555

@Faux Que you’re one weird fella

Vor Monat
Josh Montgomery
Josh Montgomery

The precision is second to none on these engines. Cant wait to see Garrets face when this thing hits. Whole new beast of an animal. Great job Steve.

Vor Monat
Nikiel Taylor
Nikiel Taylor

A casual 3000 hp motor. Well done, excited to see it running down the track in mullet.

Vor Monat
Avery Evans
Avery Evans

@Richard Paige III exactly, you don't understand. So don't comment acting like you know everything.

Vor Monat
North Texas Skies
North Texas Skies

@Richard Paige III AWD vs RWD... Their cars also don't make as much power as mullet. Talking like 500-600 less maybe more

Vor Monat
xplore300
xplore300

I have been waiting for Cleetus to get a Steve Morris engine in his cars for a long time. Magic is going to be happening now!!!!

Vor Monat
David Reynolds
David Reynolds

@charlies hammer that’s a different engine

Vor Monat
charlies hammer
charlies hammer

@David Reynolds The one I watched going together was a BBC, one of Steve's guys put it together.

Vor Monat
David Reynolds
David Reynolds

@Greg Scott but still hasn’t used it, and it’s not a big block.

Vor Monat
Greg Scott
Greg Scott

I believe this is Cleetus' second one from Steve, bout a year ago here on the channel he has another build for Cleet

Vor Monat
Atlas1
Atlas1

So glad they went with you guys. The best street/drag engines on the planet.

Vor Monat
MandoDoesIt
MandoDoesIt

This is a great thought in general, glad he finally pulled the trigger. The best part is the engine dyno, emite assembly, this was about as solid as it can possibly be. Insane!

Vor Monat
Jerry Muncey
Jerry Muncey

Thank you, Steve Morris for giving mullet the wings he always wanted! HOLYCOW

Vor Monat
Quinten Lewis
Quinten Lewis

that's a spicy unit! glad to see Cleeter getting some more horsetorques for the the ol' El-baldeago.

Vor Monat
Mr Olsen
Mr Olsen

I'am looking forward to see ty build the turbo setup for this one! 👌

Vor Monat
Jay Dobbins
Jay Dobbins

Looking forward to seeing reliable 6 second passes! You're The Man, Steve!!

Vor Monat
The Sunflow Channel
The Sunflow Channel

This thing is a beast! Can’t wait to see it perform, about time they got an engine that can actually dominate on the strip.

Vor Monat
boltonky
boltonky

Another legend engine, one day i hope to have a built engine and achieve my dream car but life is good at causing issues. Keep it up Steve and the team

Vor Monat
Scrotie Mcboogerballs
Scrotie Mcboogerballs

Can’t wait to see Cletus get this dialed in on the track you guys are some of the worlds best engine builders thanks for sharing buddy hell yeah brother

Vor Monat
WBR 78
WBR 78

Hey Steve thank you for showing us the build. The only question I have is what we’re you welding on the valve train???? Can’t for the life of me to figure that one out!!!

Vor Monat
Dick Nijenhuis
Dick Nijenhuis

FastIndy posted a comment earlier and Tim Hunter added more info to FastIndy's comment.

Vor Monat
Justin Harrison
Justin Harrison

Ha, i was wondering the exact same thing, thank you to FastIndy for enlightening us ignant folks about that lol. Old Cleeter is gonna be a rocket pilot now .

Vor Monat
Jason Lanning
Jason Lanning

It's common place to weld the rocker stands together to help stabilize everything.

Vor Monat
Un-Kun-TROLL-Able
Un-Kun-TROLL-Able

Wow absolute perfection Steve thank you onece again for sharing with us your amazing skills.👍

Vor Monat
lpd2320
lpd2320

Finally a Big Block for Mullet. Can’t wait to see this thing in action! Great collaboration Steve

Vor Monat
Bo-BQ
Bo-BQ

Very cool to watch one of the game's best work his magic. The attention to even the most minute detail is a pleasure to see. Here's hoping they bring you in for the turbo tuning when they get it together.

Vor Monat
Godly Powers
Godly Powers

Loving this! Gonna be exciting watching Mullet get down in the 6's properly without breaking something every run :P

Vor Monat
SouthJerseySound
SouthJerseySound

​@Ginga Ninja Racing sorry but Texas speed isn't all that and shouldn't have sold him a motor to try and go 6s. there comes a time when they should have said you'd be best just going big block.

Vor Monat
Ginga Ninja Racing
Ginga Ninja Racing

@dcskate1022 and welcome to my Channel 😁

Vor Monat
Ginga Ninja Racing
Ginga Ninja Racing

@dcskate1022 they're also racing harder and more often than the average person. Majority of cleetus stuff that Texas speed has done has lived a long long while unless they did something dumb.

Vor Monat
dcskate1022
dcskate1022

@Ginga Ninja Racing everything Texas speed puts together for YouTubers blows up. They’re the Walmart of drag racing. But hey, stick to making your videos for all 20 viewers.

Vor Monat
Ginga Ninja Racing
Ginga Ninja Racing

@dcskate1022 can't compare it to your 15 second rocket ship 🙄

Vor Monat
Paul Earhart
Paul Earhart

Super cool video, super cool collaboration - I really appreciate the dyno graph talk, with what you’re looking at/ what you expect because of what you’re building this motor for

Vor Monat
Class 800
Class 800

I feel like this is going to blow up beyond repair on the second pass knowing their luck

Vor Monat
Adam Persinger
Adam Persinger

I knew this was in the works and I'm so glad it has finally happened. Top of the line race engine for a top of the line guy and team! Can't wait to see Mullet ripping down the track powered by the beautiful SM power plant! 💪💪

Vor Monat
Jimmy Metcalfe
Jimmy Metcalfe

It's amazing how fast Steve moves when he's building engines, dude really knows his stuff 👌

Vor Monat
ғLxᴛɪᴄᴀʟ
ғLxᴛɪᴄᴀʟ

@Gary Host No it's not, it's actually been slowed down. 🤦‍♂

Vor Monat
Jer Gol
Jer Gol

@Gary Host It's not sped up, you can tell by the pixels and I've seen some sped up footage in my time.

Vor Monat
Buck Nasty
Buck Nasty

@Gary Host No it isn't. He just moves faster than most humans.

Vor Monat
Gary Host
Gary Host

The video is sped up.

Vor Monat
306BlownNotch
306BlownNotch

You are TRULY the G.O.A.T! You do amazing work & continue to keep your name out there! Cleetus will spread the word on your expertise! Keep up the great work/video’s Steve!👊🏾💪🏾

Vor Monat
Justin Jansen
Justin Jansen

So glad Cleetus has stepped up to a big boy motor! 💪 can wait to see another one of your motors running 7’s or better. Cleetus deserves the right motor from mullet. Can’t wait to see some killer times! Congrats

Vor Monat
Benjamin Alldridge
Benjamin Alldridge

I'm glad that Garrett finally saw sense and got good. I'm pretty surprised he didn't grab one of those SMLs though, I won't lie.

Vor Monat
Jacob Szymczak
Jacob Szymczak

I dont think the SML is ready yet. Steve recently posted the first head getting machined and it isn't even completely done yet. A more "standard" big block is probably more cost effective as well, and probably the reason Cleetus went with this over a full blown SMX

Vor Monat
Mercury madness
Mercury madness

Once again Steve knocked it out of the park.Love to see the collaboration Cletus is lucky to have such an amazing engine builder as you It’s about time one of your engines went into his cars.I have been waiting for ever to see this happen.

Vor Monat
StoneE
StoneE

It seemed like they couldn’t do one race without mullet breaking he’s so dang heavy hopefully this motor will be just what he needs!!!

Vor Monat
Texas Jack
Texas Jack

I wonder what they'd charge me if I ordered an identical engine. I'm assuming $50k to $100k...but I really have no idea.

Vor Monat
chris laing
chris laing

Cleetus just entered a whole new realm of fast. Gotta say its been a long time coming. Very glad it's your engine he chose, but what other choice is there 😁😁

Vor Monat
AU MetalMental
AU MetalMental

Pretty sweet Steve. Been following Cleetus for a min now and really anticipate of this build.✌️😎

Vor Monat
Dannob
Dannob

You have the best tech videos. Any chance you can post the full engine build but at regular speed. I love watching the build process.

Vor Monat
Bobby Gets Banned
Bobby Gets Banned

Been waiting for this since the jet was axed for Mullet, this is the engine Mullet needs! He's gonna be a real ripper now.

Vor Monat
John Kurpiewski
John Kurpiewski

I’m so glad to see this happening. Absolutely thrilled!!! Now I’m afraid he’s going to have to go to a big tire for all that !!!

Vor Monat
JC Stek
JC Stek

Nice ! You make it look easy building these Monsters ! Can't wait to see it perform in Mullet , But what I want to See is the Wagon with a 5 second 1/4 , Hope soon !

Vor Monat
barry donovan
barry donovan

really cool to see.. been following even through some bad times you were having. He'll have fun with this for sure.

Vor Monat
Jason Popovich
Jason Popovich

So excited to see what this motor can do in mullet! You build the baddest street race engines for sure super excited for this combo in mullet!!!!

Vor Monat
John Mattu
John Mattu

Nice work Steve, I'm sure you're going to make Garrett look great. Thanks for all the help Brother!👍

Vor Monat
Kenneth Lemke
Kenneth Lemke

Excellent..so excited to see Mullet get one of your engines. Big fan of both of you guys. Super excited to see Mullet make its first pass. I have been hoping Cletus would try one of your engines. In my opinion the top engine builder around and definitely state of the art technology and development. Keep putting out the great stuff. FF and SM great combo…both fantastic companies.

Vor Monat
Jason Harry
Jason Harry

Looking forward to seeing what this car does with your built engine Good job brother

Vor Monat
G Crauwels
G Crauwels

I was curious about the head gasket arrangement since they're going to be running a fair amount of boost. Looks pretty robust.

Vor Monat
Corey Strong
Corey Strong

This is awesome Steve. You and Kyle do an amazing job

Vor Monat
Joseph Quintiliani
Joseph Quintiliani

Mullet is going to be a beast with this engine. I can't wait to see it under boost.

Vor Monat
wnnalis cioov
wnnalis cioov

Hey Steve thank you for showing us the build. The only question I have is what we’re you welding on the valve train???? Can’t for the life of me to figure that one out!!!

Vor Monat
Vin Kohl
Vin Kohl

it really hit me when he said 3,000 horsepower at the wheels. Mullet is entering a whole new dimension!

Vor Monat
John Parrish
John Parrish

I've always been nervous about running aluminum rods on the street only because I have no idea how long you can run them before they need to be changed. I've asked a lot of people, race engine builders and rod manufacturers, and never got the same answer twice.

Vor Monat
Come and Travel!
Come and Travel!

I can't ever remember seeing a lower-end, pistons and rods and crank look so damn beefy. Whoa, nice!

Vor Monat
getmysatisfaction1
getmysatisfaction1

love seeing this happen.....I am hoping Cleetus also gets one of your LS engines too....!

Vor Monat
atamagashock
atamagashock

So excited for this. For a year now I’ve been hoping garret would go this route with mullet. Who better to build it than you! I absolutely can’t wait to see this on RMRW, Midwest drag week, and any other drag and drive events he does. Always my favorite events and this time of year is the best. Such a beautiful motor like every motor that comes out of your shop.

Vor Monat
David Miller
David Miller

I'd love to know the engineering between the timing belt vs. timing chain.

Vor Monat
Tony Ives
Tony Ives

What a totally badass motor as always can't wait to see what this does on boost too going to look so good in mullet

Vor Monat
Man-E 4g63
Man-E 4g63

I’ve been a tech for 13-14 years and this is what I would really love to end up doing. Becoming a respectable engine builder.

Vor Monat
Josh M86
Josh M86

That's an awesome engine. Do you do any sorta break in period on your engines?

Vor Monat
Bryan Luntz
Bryan Luntz

A Pleasure to meet you Steve Amazing big block Can't wait to see Mullet run it down the track Nice hat🙂

Vor Monat
Blackswagga Blackout
Blackswagga Blackout

Steve you're the best when it comes to building engines hopefully one day I can get you to build mines

Vor Monat
D G
D G

Whats a beautiful lump like that cost? I'm guessing around $50k? Absolutely fantastic content as always Steve!

Vor Monat
D C
D C

@Neil Reid At least it might hold together now. Probably spent that much on breaking small blocks. I will say he got the most you're going to get out of an LS. Big Block is just so much different. MULLET is gonna do low 7s with ease.

Vor Monat
Neil Reid
Neil Reid

Try $80K just for the lump. Turbo's and all else probably another $20K all in. The roller (Mullet) with tranny/suspension/rear end is in the $80K range. So, ya, some real coin there by the time it hits the burnout box.

Vor Monat
Aaron P
Aaron P

If you have to ask 😉…

Vor Monat
6doorshop david
6doorshop david

Thanks for hooking them boys up.i stayed on him to get a real motor from you .I have been a fan of yours since your start in racing i could never afford one of your set ups but to watch them boys try to get that kind of power down the track is going to be a blast

Vor Monat
Napue
Napue

One of the few cases you legitimately get what you pay for. Great work

Vor Monat
Chaleboy60
Chaleboy60

Beautiful awesome time lapse also. Can't wait to see this monster in mullet. Looks like you know the guys to make sure it's Cleetus proof lol

Vor Monat
rikkierikkie
rikkierikkie

Cleeter couldn't stop smiling when they opened the box 😁

Vor Monat
MacGyver1
MacGyver1

Hell yeah brother, I know he's done pretty far with the Texas speed Ls's, even down to the 6 second pass, but now he's gonna have power on reserve

Vor Monat
Mostly Motorized
Mostly Motorized

That block seems to have a very special lifter geometry for extremely high rpm. 😍 looking forward to hearing it scream

Vor Monat
Vertex Jeff
Vertex Jeff

Hey Steve - what were you Tig welding on the one side of the head when you were assembling the rocker gear? Just curious!

Vor Monat
Paul Copeland
Paul Copeland

@brianok100 ...Sure, you bet!

Vor Monat
brianok100
brianok100

@Paul Copeland Thanks for the reply. That makes sense. I know the big block Chevy Jesel stands are individual pieces, not one long stand. It's been awhile since I've worked on a big block Chevy with Jesel stuff.... back then, ours were not welded together but I can see where that would greatly increase overall rigidity and strength. Thanks for the reply. 👍

Vor Monat
Paul Copeland
Paul Copeland

Welding the rocker stands together. Common practice on high HP, big race motors.

Vor Monat
Daniel
Daniel

I was wondering the exact same thing. If I'm pulling something out of my ass I'd say that maybe the shaft mount rocker setup is set up to fit a (small) variety of mount locations, and you can get more rigidity/consistency if you weld it up after assembling it to your head. But that's just making up the only thing I can think of that's plausible, it's probably wrong.

Vor Monat
brianok100
brianok100

I was wondering the same thing...

Vor Monat
Scott Creighton
Scott Creighton

I'm glad Cletus finally saw the light to buy one of your motors now he's going to feel real horsepower 🚦

Vor Monat
Ryan Hines
Ryan Hines

Love it! Always a master at what you do.

Vor Monat
Scott Smith
Scott Smith

Built…. By the MAN himself! Doesn’t get any better than that!

Vor Monat
ferrelx
ferrelx

1:51 Interesting that Brodix hasn't incorporated a lip seal over the years vs a "rope" style seal.. does it do a better job against crank case pressure ?

Vor Monat
Tony Jackson
Tony Jackson

What are the pros and cons of belts vs. gears vs. chains for timing sets?

Vor Monat
Rick Janssen
Rick Janssen

sweet motor, can't wait to see it in action.

Vor Monat
Jack Martin
Jack Martin

Hell yeah brother! 😎👍. Thanks Steve you’re a true leader in design and application !

Vor Monat
Jonathan Snipes
Jonathan Snipes

Truely are a master at your craft! That intake is a piece of art! Everything you do is top notch! Cant wait to see this motor running in his elco. Just wish i had enough money to afford one of your engines. Them things are sick! Keep up the great work!

Vor Monat
Charles Henshaw
Charles Henshaw

It would be great if they bring it back to you to tune it on the hub dyno. Looks like a great build.

Vor Monat
Paul Copeland
Paul Copeland

I don't believe Morris has a hub dyno. Why would he? Engines are his business not chassis!

Vor Monat
The Reverend
The Reverend

They bought a hub dyno for their shop but it hasn't been installed yet I heard.....

Vor Monat
Monte Stu
Monte Stu

That’s a long drive!

Vor Monat
Just Me
Just Me

I have been waiting for Cleetus to step up his engine program. Looks like he did. I like it.

Vor Monat
Neil Reid
Neil Reid

Even your dyno headers are gorgeous. Super excited to see this monster making thunder in Mullett. Wow.

Vor Monat
BassManBobBassCovers
BassManBobBassCovers

Super stoked! Looks well built with great parts by a badass!

Vor Monat
crazyjr
crazyjr

The numbers on the valve cover rail, are those the lengths for that valves pushrod? Mullet did well with the LS based engine, but they were just pushing it too hard, glad to see them getting a proper 6 second engine

Vor Monat
DRIVE ventures
DRIVE ventures

That 3 injector setup is wicked! He's gonna love this motor*

Vor Monat
Roger Randolph
Roger Randolph

Can hardly wait to see it in action. Keep it up!

Vor Monat
Elwood Roads Music
Elwood Roads Music

I'm pumped for Mullet. My favourite car in Garrets fleet, this is going to be awesome.

Vor Monat
Tripp Rogers
Tripp Rogers

You can hear how appalled Steve sounds when he says the words “pump gas” L O L

Vor Monat
MrSmotheredHope
MrSmotheredHope

The force is strong with this one! Notice it was dyno'd on May the 4th!🦾

Vor Monat
WASDxMerceless
WASDxMerceless

May the forced induction be with Cleetus!

Vor Monat
Michael Allen
Michael Allen

Finally a real engine for Mullet.

Vor Monat
Thomas Philyaw
Thomas Philyaw

Thank God Cleetus chose you guys for the engine build. Ought to be a wild ride watching them chase that big block horse power

Vor Monat
niddg viiut
niddg viiut

One of the few cases you legitimately get what you pay for. Great work

Vor Monat
Garykaren Mcgruther
Garykaren Mcgruther

I'm only in the beginning part of the video and I'm always paying attention to details. Did you use Maximum Assembly grease to install the rings? And why? I usually use Amsoil assembly lube to do that with the bearing's. I love your videos. Attention to detail is a big big thing but the attention to the smaller details is what I find that counts the most. You definitely proven that. Thank you.

Vor Monat
Southern Cross Garage
Southern Cross Garage

That is awesome. 3,000 at the wheels is mind boggling.... even NA that engine is amazing 😀 May I ask why the belt drive for the cam? Why not the traditional chain drive? Curious.

Vor Monat
charlie mcmillan jr
charlie mcmillan jr

Finally Cleetus reaches the pinnacle of power plants. A true work of hand built engineering marvel worth every penny. Can't wait to see this Morris Monsgo to work.

Vor Monat
TASSIE HUNTER
TASSIE HUNTER

Hope Garret brought extended warranty conversion up with Steve. Those “ To the moon Tune’s “ sure do send parts to the moon 😂. So excited seeing Garret go to the Big Block. I can see a future video of “ Mullet gets the SMX 4500hp+ upgrade “

Vor 24 Tage
Miles M
Miles M

Realistically how long should a top dollar engine like this last? I’m genuinely curious

Vor Monat
khaoz wins
khaoz wins

much respect you build great pieces of art

Vor Monat
Danny Crooks
Danny Crooks

Can't wait to see it in the cars looks like an awesome engine

Vor Monat
doliio volay
doliio volay

Hey Steve thank you for showing us the build. The only question I have is what we’re you welding on the valve train???? Can’t for the life of me to figure that one out!!!

Vor Monat
Mixed Goku
Mixed Goku

The engineer in me is salivating this motor has a absolute unlimited amount of potential!

Vor Monat
TheFriskyComiskey !
TheFriskyComiskey !

2000HP to the wheels ain't bad at all. Great job!

Vor 29 Tage
John R New
John R New

Sheeew Buddy!!! This is engine is what we've all been waiting for!! I'm so excited to see how this engine transforms Mullet!!

Vor Monat
MF Saws
MF Saws

Oh man I have been hoping old Cleet was going to run one of your builds. You are a craftsman in your trade. 🤟 You really take pride in your stuff and people know.

Vor Monat
Patty S
Patty S

Loved the time lapse , cant wait to see cleetus finally have a reliable powerplant that can actually run a number. CONGRATULATIONS

Vor Monat
Johnny's Laboratory (formerly Burning Rubber 731)
Johnny's Laboratory (formerly Burning Rubber 731)

Nothing that runs 6's is reliable.... or 7's.... or 8's..... Maybe 9's? ..... lol

Vor Monat

Nächster

4000+ HP SMX Rebuild for the Wagon!

33:52

4000+ HP SMX Rebuild for the Wagon!

Steve Morris Engines

Aufrufe 57 000

WE GOT ENGAGED!

20:21

WE GOT ENGAGED!

Miniminter

Aufrufe 2 570 254

Lt.Dan Goes Drifting!

15:34

Lt.Dan Goes Drifting!

Dr.TuneEmAll

Aufrufe 150 000

We Had a Bad Crash... (Just Bought This Car)

16:29

We Had a Bad Crash... (Just Bought This Car)

Cleetus McFarland

Aufrufe 1 500 000

Hamid checkt den neuen Range Rover P530 First Edition 😎  | GRIP

23:38

KAREN DOESN'T LIKE THE MUSTANG 😭 #shorts

0:16

KAREN DOESN'T LIKE THE MUSTANG 😭 #shorts

Ford Mustang Club

Aufrufe 2 620 833

Premiere im Airbus A320 | SPIEGEL TV

43:20

Premiere im Airbus A320 | SPIEGEL TV

DER SPIEGEL

Aufrufe 142 396

90er Jahre HIFI Ausbau für den Ferrari Golf 2!

24:51

90er Jahre HIFI Ausbau für den Ferrari Golf 2!

LB GARAGE [Marvin Hörner]

Aufrufe 83 475

Schafft der 6x6 XMAXX es über WASSER ZU FAHREN?

14:18

When the new guy replaces a battery 😳 #shorts

0:18

When the new guy replaces a battery 😳 #shorts

Its MechaniCole

Aufrufe 2 003 587