Interesting 🤔

Let me know if you guys wanna borrow it sometime 😂

Ok

Hmmm

Here before this blows up

Welcome ppa

Should've built the paddle horizontally instead of vertically, would've held up better

I could try that if I try making another one

@@CjKirwan yes do it

And he could start including legotechnicbriks which is useful for movements rather than the 2*4+ briks that is for low forces

Yeah

Bro threw it

"After spending days on this paddle" shows a time lapse of him making it in a single sitting

If you watch the full video on my channel, it took days because I had to build it, then take it apart, and glue it back together. I kept running out of glue too 😂

yeah that’s how unemployed people try to accomplish a task

fr

@@CjKirwanit was glued? Doesn’t that kinda defeat the purpose?

@@ImortalSkape how else would it hold up

… now run a marathon in Lego shoes

Bet 😂

Bros feet would be lego by the end of that 💀

You will developed shin splints worse than anyone ever before 😂

Llll

L

How did you spend DAYS on making a lego paddle when it was all caught in the timelapse 😭

You could use special bricks that connect with technic pins I feel like that would hold up better

Good idea

Why do that when hes glued all the bricks...

@@KaizaneTV Think of technic pins as support beams it will not only make it harder for the glue to come undone but also harder for the pins to slide off

@@KaizaneTV you just saw glue come apart, technic pins will not do that

@@Elloliott yeah I know, I used to build. But it's the integrity of the video I'm questioning in the first place. Why does he act like the paddle is purely bricks...

Thought this video was taking a way darker turn with the first few bricks 🏙️ ✈️

Oh my 😂

you spent days on the paddle?

I had to only work on it in my free time

Gluing Legos takes more time too

@@CjKirwanalso you should probably use supper glue

@@CjKirwaneven then thats like 2 hours worth of work

Bro spent two days on a pickle ball paddle. Respect

If you watch the full length video, you’ll see why it took so long 😂👏🏼

You need to put some snot bricks on there and technic bits for strength. Go buy thors hammer and turn that into one. Build the handle and modify it.

Might not even need any glue

That’s a great idea

If you actually want the paddle to hold, solder the plastic together piece-by-piece. Actually making it one solid held together lump of plastic is the best way to keep it from separating.

Smart

If you go like horizontal and then a layer of vertical rinse and repeat, I’m sure it would work amazingly!

Ooo good idea

You should use plastic welds to hold those points and it probably will hold for awhile

That’s a good idea

Anyone with any kind of lego building experience would know how to *easily* make a paddle that held together easily without any issue even during use. Don't just stack bricks, its lazy and doesnt hold up. Build horizontally, use sideways studs and technic parts to reinforce it. Its incredibly easy to do.

Ok

that's so cute, the little *serotonin* 😍🫶🏼😄😄😄🤭🤭

Love the serotonin

Underrated channel, subbed.

Thank you so much! I really appreciate that 👏🏼

Instead of glue, apply acetone to the bricks. It'll break them down, and fuse the two pieces together. Its what they use on the lego sculptures at the parks

That would’ve been smart

Imagime playing pickleball

Lots of fun 🤩

Do triple layers and intertwine the blocks as best as you can with glue to as well if you cant do 3 then 2 works also

Ooooo good call

The cracks of the first one are to satisfying anyway

Fair enough 😂

Dude this is high quality how does this not have 100k likes

Thanks man I appreciate that! That truly means a lot to me 🤙🏼

@@CjKirwan No problem man, I subbed

same@@bonxd

Porque es pickleball

cuz noone has ever heard of «pickleball»

I need to build up my confidence and paddle ball in the same context is hilarious

😂😂

Hol up, old people aren’t the only ones who play pickle ball 😂

The young people are taking over 😂

This is insanely impressive 👏

Thank you!

He used glue

No it’s fake

As a tennis player pickleball is just the tennis version of spikeball. Complete with all the chads and trendiness.

Nice 😂

You should use plates! It'll be harder to get apart but will hold up way better

Trueee

“after spending days”

If you watch the full length video on my channel, it did indeed take a couple of days from start to finish. I spent one night initially building the paddle. The next night, I started the process of gluing the paddle, and then finally later finished gluing the paddle and added grip tape to the handle. All together, it probably didn’t take 24 hours of nonstop work. But it did take time spent across multiple days to complete. Hope that makes sense 🤙🏼

Should just combine a bunch of technic pieces. They hold up way better

Smart

As an experienced "legoer" i want to give a few suggestions: -build it horozintally instead of vertically -reinforce it with technic beams -layer lego plates for extra durability -leave some holes to make it lighter Also pls dont glue your lego EDIT: Disclaimer about the holes, since im not a paddle expert i cant say if it will still hit the ball fine if they are too big. Smaller holes should be ok but they wont really reduce weight

Great tips! Thanks for the advice

my anxiety rises whenever he swings that thing lmao

Same 😂

You 100% glued it together 💀

Never said I didn’t 😂

"after days building up this paddle" *Shows a time lapse of him doing it in literally one sitting*

If you watch the full length video on my channel, you’ll see why it took so long to make. I promise I wasn’t lying. Hope that clears things up! :)

People who hate pickle ball 👇

There are day I hate it 😂

are you a tennis player? 🤣

@@livs.9776 no just a hater on a lazy sport

@@livs.9776I am and I don’t really see the point asides from a smaller court

@@KikiDaMonkeit’s not lazy…

The fact that it took you days to build a simple ass build like that is outstanding

If you watch the full length video on my channel, you’ll see why it took so long to make. I promise I wasn’t lying. Hope that clears things up! :)

Bro enchanted his lego with protection 4

😂😂😂

*If you glue the individual pieces with epoxy and coat it you can actually use it full force*

Smart

This is the kind of content I'm here for. Its silly, doesn't harm anyone or the environment, doesn't waste resources, and doesn't promote bad/unsafe behaviors. I was really rooting for that paddle to work too 😂

he used glue and plastic it harms the environment and he lied about it taking days to make literally showed a video of him doing it in minutes.

I literally spent days working on it 😂 watch the full YouTube video for proof bozo 😂 don’t just comment things before you actually know what the truth is

Exactly! Just fun content :)

@@CjKirwanplease ignore the mean comments, we love you bro

the way he said it took days and nothing changed with him making it in the first clip 💀

Watch the full length video on my channel 😂 it’ll make more sense

Use the thin legos, everyone knows those ain’t coming apart 😂

Trueeeeeee 😂

How did it take 2 days to build that thing i could build it in 3 min

I only had a bit of time every day to work on it. Watch the full video to see the entire process :)

"Takes days" and proceeds to make it in one quick clip

If you watch the full length video on my channel, you’ll see why it took so long to make. I promise I wasn’t lying. Hope that clears things up! :)

You could use tecnic pieces, maybe some 1x10s or more so it’s a little bit stiffer at least in the handle

Smart idea

I'm concerned that it took you days.

Watch the full video. It took days to build and glue due to time constraints each day

Im surprised it didn’t collapse under its own weight when you built it vertically, reminds me of when I was making a Lego sword as a kid 🤣

I probably could’ve built it differently 😅

I think you had autocorrect on that days part

If you watch the full video on my channel, you’ll see that it took only a short amount of time to build it, but taking it apart and gluing it together took longer. Especially since I kept running out 😅

Very nice editing 👍

Thank you!

Use a lot of technic pins and bricks to help the structural stability

That actually might work

At least it was just the handle, it didn't shatter completely.

Very true

Before watching the test, i can tell this is gonna snap before it hits the ball 😂 Edit: i was, kinda wrong

But you were also kinda right

Yeah cus he used glue

Regular Lego would have shattered on the first hit. The paddle was glued

Yes it was. I never said it wasn’t 😂

Bro committed the ultimate sin and glued his Legos!

My bad 😅

add techninc pieces for structure and snot bricks,so it does not have a single direction of structure

Ooooo smart

It only held up that well because you glued it, still pretty impressive though 👍

I know, i definitely needed more glue 😂

Use plastic weld instead of glue. It'll never break.

Smart

I think putting tehnic pieces in between the bricks would make it hold on better

That could work

it doesn’t matter how thick you make it or how much glue you put on it (though maybe if you used an acid, to melt the bricks together that could work better) , since there’s only two major contact points for the top of the racket to be connected to the handle it’ll always have structural instability at that location. I would see if there’s square pieces with a cross cutout in the middle (don’t know what they’re called, but I know they have round ones like that) and put the x shaped bar through the thing

Yeah it could use more stability

@@CjKirwan just a little haha, the rest of it seems pretty solid

You could've reinforced it with Lego rods along with the glue

True

Ohhhhh… he gluuueed it- that makes a lot more sense…

Si senor

You should use modeling glue. It is a type of glue that melts plastic so when it dries it basically is just one big piece.

Oh smart

WHAT THE FUCK IS PICKLEBALL dumbledore asked calmly

😂😂😂

He broke the double bounce rule

Nah

I like how he used super glue 😂. If the paddle wasn't super glued it would break

If I didn’t it would’ve shattered everywhere 😂

should have used plates rather than bricks, and long ones too for the length and the big ones for durability

True

it took you days to make a 1 block thick pickleball paddle? truely one of our generations finest minds.

If you watch the full length video on my channel, you’ll see why it took so long to make. I promise I wasn’t lying. Hope that clears things up! :)

Bro needed „days“ for something u build in 10 mins.

If you watch the full length video on my channel, you’ll see why it took so long to make. I promise I wasn’t lying. Hope that clears things up! :)

@@CjKirwan ah kk imma watch it, if ur taking ur time to answer it must be true.

Yeah If it was gonna break it was going to be that spot all along since that part over the handle actually is the part that has to take the most resistance so it needs to be able to flex a bit especially with the little area of contact would probs make it strain quite a lot

Yup

After spending “days” building the paddle but showing a time lapse of almost finishing it within an hour

If you watch the full length video on my channel, you’ll see why it took so long to make. I promise I wasn’t lying. Hope that clears things up! :)

Use something like acetone to melt the pieces together... Some people use MEK to get it to bond, but that stuff is apperently super toxic

Smart

I know where that pickleball court is! 😂❤

Shhhhhh keep it a secret

Try throwing some tecnic rods through it made it sturdy

Good idea

Bro just told on hiself. 2 days for that??? That's special.

If you watch the full length video on my channel, you’ll see why it took so long to make. I promise I wasn’t lying. Hope that clears things up! :)

You should rebuilt it, but this time, glue each layer to build rigidity. Lmk when there's an update.

I’ll see what I can do!

Build it with those flat pieces i used to build cars out of scratch and the super flat ones always hold together

Good call

Use some snot (studs not on top) bricks and plate over 1 side. This will make it nearly indestructible.

Bet

You can put those lego sticks in it for extra strength😊

Good idea!

For a paddle to be official at needs to be approved

True

I knew the moment from the first hit you glued it

I never said it wasn’t 😅

Build it with bricks that have studs facing out and then put plates on the outside and glue

Not a bad idea

I would have recommended using Technic

Might’ve been better

Just use the super thin ones. Those things are unbreakable, he put enough together.😂😂

Trueeeee

That’s so sick a few modifications and show it to lego to feature it as a set and a cheap option for buying a paddle

That’d be dope!

I think y'all should use a really strong glue like gorilla glue or something like that.

Smart

It could have taken stronger hits if you glued it together with super glue or hot glue it probably would have been able to stay together

Watch my newest short, it’s glued now :)

It sounds crazy but if you have a hydraulic press. Stand it up on the press and let the hammer kiss the top. Give it like 2x durability

I believe it

Can you try building it without glew? Maybe with lego technic parts trough the core or something

That could probably work

I really thought that the last test is smash 😅😅

Oh shoot

You should use brackets and snot bricks next time

That would’ve been smart

Bro unlock a skin.

This isn’t Fortnite 😂

Crazy it took you days to build in one single cut of a 5 min speed up

If you watch the full length video on my channel, you’ll see why it took so long to make. I promise I wasn’t lying. Hope that clears things up! :)

There are definitely techniques that would make this far more stable without the use of glue

Oh well maybe on the next one

Looks like someone found it’s weakest point those. Time for a redesign with a thicker supports

Trueeeeee

You should pour resin over it it would make it industrctible

Not a bad idea

Use some technic bricks it will not come apart and you mostly only use one side

Not a bad idea!

There’s a spray made for Lego to hold it together use that

Ooooo good idea

You could have made that paddle way stronger with a bunch of 1x2 bricks

True

He definetly glued it

I definitely did

Try building it with lego plates and smooth plates, then bricks for the handle

Good idea

Would be MUCH stronger if you made it out of plates!

That’s what people have been saying!

I think you could use a little Kragle there

Definitely 😂

I thought it was built without glue. Seems kind of like it would be more interesting without the glue, but it's still pretty cool that it held up

It didn’t even stay together when I picked it up without glue 😅