Explosive powered nut cracker vs. metal nuts

  • Am Vor Monat

    Stuff Made HereStuff Made Here

    Check out KiwiCo.com/StuffMadeHere and get 50% off your first month of any crate!
    Get merch, support the channel: stuffmadehere.shop
    Help support these videos on patreon: patreon.com/stuffmadehere

    ---------------------------

    I've been waiting for the crossover episode between my explosive bat and a nut cracker for over a year. It was totally worth the wait. Hope you enjoy it!

Stuff Made Here
Stuff Made Here

If you like these videos you you can now help support them with merch at https://stuffmadehere.shop! I made a really cool shirt with s blueprint from my unpickable lock. All purchases before December 10th will put your name in the hat for one of two original paintings from Janksy ("Angry Wife" and "Is this thing on").

Vor Monat
DaKermitFrog
DaKermitFrog

i dont know, even thinking about it my mind goes into a too large / cost ... make a gyroscopic vehicle. make the bubble car from jurrasic world D;

Vor 4 Tage
howard baxter
howard baxter

@DaKermitFrog what do you have in mind?

Vor 4 Tage
DaKermitFrog
DaKermitFrog

Can you do something with tracks/Omni wheels?

Vor 4 Tage
Salvador Santos
Salvador Santos

@Filgaming 770p

Vor 6 Tage
Rozelkyia
Rozelkyia

Could have added a whoopie cushion to the end of the venting chamber instead of the muffler so it would fart every time you crack a nut.

Vor 7 Tage
SmarterEveryDay
SmarterEveryDay

This is not a nut cracker. This is a nut buster.

Vor Monat
Yeahhh Boyyy
Yeahhh Boyyy

💀

Vor 3 Tage
One Handed Sharp Shooter
One Handed Sharp Shooter

Just commented the same thing without seeing your post. Great minds think alike lol

Vor 8 Tage
howard baxter
howard baxter

Good to see Destin commenting on a fellow engineer’s channel. Looking forward to future colabs between the two of y’all.

Vor 20 Tage
Finnix133
Finnix133

That is a nut annihilator, even

Vor 28 Tage
candlish
candlish

No its a nut destroyer

Vor 28 Tage
I did a thing
I did a thing

I cant help but feel that the warning of not playing with blanks was direct at me..........

Vor Monat
Komrade BigTex sucks
Komrade BigTex sucks

definitely not. youve never been one to listen to warning anyway.

Vor 14 Tage
Potato Boi
Potato Boi

ayo the engineers are here

Vor 22 Tage
james smith
james smith

@Jonathan Davies thats called a gun.

Vor Monat
I did a thing
I did a thing

@meh ahahahaha

Vor Monat
meh
meh

it was directed at Alec Baldwin

Vor Monat
Charlotte Stang
Charlotte Stang

one of my favorite build montages ever. the music, the timing, the repetition, everything was perfect. had to watch it a couple times just for fun

Vor Monat
good anytime j
good anytime j

I absolutely love this channel, I'm a CNC machinist, changed careers in my late 20's and went back to school for CNC and still now that I've been working in the field for almost 3 years feel like a rookie sometimes. Every video you make I either learn something new or learn a different way of solving a problem. And it's fun having a channel to talk to a bunch of old shop monkeys about (I'm by far the youngest guy at my job) thanks for all you do man and have a happy holiday!

Vor 22 Tage
Trumpatier
Trumpatier

I'm so glad I found this channel long enough ago to see the constant progression of Shane's video quality, presentation skills, and everything else. This channel is moving from amazing to world changing!

Vor Monat
A Mere Creator
A Mere Creator

Ah yes, not the 200 caliber nut buster we deserved, but the 200 caliber nut buster we needed

Vor Monat
FrozenGamerMan
FrozenGamerMan

Let's castrate pedophiles with it!

Vor 19 Tage
Chad Henderson
Chad Henderson

Also, as far as the mm measurement stands when asking about ammo or a firearm that uses said ammo, the word "chambered" sometimes is used when referring to the firearm. For example; The Desert Eagle Full size handgun was available in three different calibers. The customer had the option of choosing their Desert Eagle chambered in .357, .44 Magnum, or .50 caliber. The total empty weight of the pistol remained at 8.5 lbs regardless of caliber chosen. The smaller and much less expensive version called, "Baby Eagle", was also a available in three different calibers as well, chambered in 9mm, .40 cal, or . 41 caliber. I found the .40 and .41 caliber options very odd back in the early 1990's when I first discovered the Baby Eagle. It was so much lighter and easier to handle than the full size of course, but just how drastic the difference was between them is night and day. I preferred the smaller version then and I still prefer now rather than the full size.

Vor Monat
Jay Russell - '02, LB7 Duramax
Jay Russell - '02, LB7 Duramax

@e-zeeTV Yeah. This brought out some interesting research, too! Honestly, classifying firearms by caliber is almost meaningless since we stopped using spherical bullets. Nowadays, multiple rounds with the same bullet diameter can be WILDLY different in powder charge, such as the .50 GI and .50 BMG. Thank you! The same to you and yours!

Vor Monat
e-zeeTV
e-zeeTV

@Jay Russell - '02, LB7 Duramax what about a 5.56 calibre? Anyway i was only trying to correct the persons maths (1/2 × 4 =2) i do understand what you are saying though. Its confusing because when people say .50 cal, the inch is dropped but when they say 9mm, calibre is dropped . Good chat anyway hope you & your loved have a good Christmas .

Vor Monat
Jay Russell - '02, LB7 Duramax
Jay Russell - '02, LB7 Duramax

@e-zeeTV That's fair. Again, I admit that, at its most general, caliber just means the inside diameter of a firearm, and does not specify a unit. However, as is the case with many words, the meaning of it can vary from place to place. So, in the US - where this video was made and where I'm commenting from - caliber refers to 1/100th of an inch. That's how it's virtually always used. Also, I've never heard anyone refer to a metric round as "9 mm caliber". Caliber is virtually always dropped when describing a metric cartridge. Culture has a strange way of overriding the dictionary, doesn't it? I hear so many words get used by the kids at my church in a way that's radically different from the definition. Yet, if I comment on it, they look at me like I'm an alien or something. Haha!

Vor Monat
Tevin Eddy
Tevin Eddy

Shane: "Don't try this at home." Me (overengineering the imperative): "Let's explore the meaning of the word 'try'..."

Vor Monat
Matheus Dias
Matheus Dias

The way he has fun doing the voiceovers always makes me smile

Vor Monat
Paul Schatz
Paul Schatz

You have the coolest channel on this platform by far! Seriously my favorite channel! I wish I understood science and engineering as well as you to create fun things like this!!!!! Keep up your awesome work man!

Vor Tag
7. Nguyễn Anh Hải
7. Nguyễn Anh Hải

Man, him being so good at these kinds of stuff is one thing, but his sense of humor and the editing. Wow!

Vor Monat
Karl Wünsche
Karl Wünsche

"The big question." "I already married you." Was probably one of the most underrated jokes in this video.

Vor Monat
Chiron
Chiron

They're honestly perfect together and it's amazing

Vor Monat
uwe majestijn
uwe majestijn

I liked the video after this

Vor Monat
Faisal
Faisal

19:10

Vor Monat
EverClouds
EverClouds

Ong

Vor Monat
Simply Thimble
Simply Thimble

@Bert Mortino same

Vor Monat
Evan Schubert
Evan Schubert

I loved this video! This was an awesome project and I appreciate how well you showed the engineering process. Love Jaws!

Vor 22 Tage
nick00less
nick00less

Thankful for you and your wife. You two remind me of my wife and I. I’m thankful she puts up with my shenanigans and allows me to purchase items, even though I already purchased it and received shipping info days prior to me asking 🙂

Vor Monat
connor y
connor y

This is awesome! I would make the flash hole larger. You're getting a lot of head losses due to small diameter, and right angles

Vor Monat
Serial Procrastinator
Serial Procrastinator

Learning while being entertained to no end. Your videos are absolutely gold. Imagine the neighbors constantly hearing the bangs from the tests haha. And love the wife doing the Kilroy was here imitation lol

Vor Monat
Brian McDowell
Brian McDowell

The editing, jokes, and storytelling, along with all the science, just keeps getting better!

Vor Monat
greentjmtl
greentjmtl

@Bill Sorrell Of course you find it funny, like the guys in pointy white hats love each other's joke too.

Vor 15 Tage
Bill Sorrell
Bill Sorrell

@greentjmtl - Nothing funnier than some butthurt troll who maxed out their race card.

Vor 15 Tage
Adam
Adam

That’s why we’re here

Vor Monat
Polydull Memes
Polydull Memes

Nut cracker lore

Vor Monat
Commander AMG
Commander AMG

Deeznuts

Vor Monat
Ben , Umbrardor
Ben , Umbrardor

I love how extra educational this felt. Really made it all understandable

Vor Tag
Donald Gillespie
Donald Gillespie

You should be proud of how well your videos have progressed in quality and humour even in the past year, well done

Vor Monat
Ryan Wood
Ryan Wood

That's awesome, absolutely think you and your wife are very clever making interesting projects with great details. Keep up the good work guys .👍 All the way from Australia 👍

Vor 19 Tage
benjammin2929
benjammin2929

Probably my favorite video of yours yet. Your description of Yield Strength was very well put.

Vor Monat
Wesley Koewing
Wesley Koewing

“Time for the big question” “I already married you” Your wife is hilarious

Vor Monat
Warblebeast
Warblebeast

And the beeeg smiles, very entertaining

Vor Monat
Wesley Koewing
Wesley Koewing

@ameyarocks yes, to him

Vor Monat
Ya Boi Rogers
Ya Boi Rogers

She was so fun this time, it was a pleasure to watch them both

Vor Monat
St0RM33
St0RM33

savage 😂🤣

Vor Monat
𝕵 𝕾
𝕵 𝕾

Scripted.

Vor Monat
Eaoke3
Eaoke3

Your videos are super inspirational. I really love all of your content, its creative, entertaining, and I always learn something.

Vor Monat
CrewmanDerek
CrewmanDerek

I’m a relatively newer viewer and this channel has skyrocketed into my top 5 in all of YouTube! Amazing stuff man! I went back and watched all of your stuff and it’s fantastic

Vor Monat
Encysted
Encysted

Hey, I really appreciated the explanation of yield strength in this, especially tying it into the maths, as an explanation of the components that go into sizing. I was missing that from the previous projects.

Vor Monat
absollnk
absollnk

I love that you show failed attempts, it's very interesting to see what goes wrong initially

Vor 18 Tage
Greg Green
Greg Green

Shane: *Makes a nutcracker with 80k pounds of force* Shane’s Explanation: “If I put a piston over these blanks, the expanding gas will shoot it up and crush deez nuts.”

Vor Monat
👺samurai boi
👺samurai boi

@João Cunha and now its popular

Vor Monat
B.
B.

Remember... It's all powered by shell-farts

Vor Monat
Alumorus
Alumorus

@alex39082 I was using voice to text, I said it in a voice that would let you know I was amused, but reading it in text it makes me sound like what my profile picture talks like.

Vor Monat
alex39082
alex39082

@Alumorus Did it really though? You didn’t even ROFL or LMAO… not even a simple LOL.

Vor Monat
Charlie Sipple
Charlie Sipple

*HAAA!!* GOT EEM!

Vor Monat
Ollanius_papyrus
Ollanius_papyrus

“If a friend asks you if you want to make something powder-actuated, just say no,” Words to live by.

Vor 12 Tage
Mikkel Pedersen
Mikkel Pedersen

Personally i feel like you are doing what we all have wanted to or thought about doing. All i can say is . you are awesome, keep it up

Vor 4 Tage
CruceibleProductions
CruceibleProductions

I just finished my strengths of materials class and really enjoy seeing the topics I’m learning about applied! Keep up the great work!

Vor Monat
Tristan Scott
Tristan Scott

I love this style of video. The editing is getting alot better. lol, great work!

Vor Monat
SRFriso94
SRFriso94

"The big question..." "I already married you." She's definitely a keeper.

Vor Monat
Idiot Buster
Idiot Buster

@Kyzen I mean, who doesn't like a greasy salty snack now and then? Especially when you've drunk a bit too much

Vor Monat
Shubhendu katiyar
Shubhendu katiyar

She is kept.

Vor Monat
KDC Krusia
KDC Krusia

They look like siblings

Vor Monat
Blox117
Blox117

@MixMin i agree, these people are not intelligent enough to go beyond insults

Vor Monat
MixMin
MixMin

@Blox117 so do you have an actual argument or are you just gonna throw low-tier insults

Vor Monat
Chris O'Farrell
Chris O'Farrell

More of the comedic writing of Mrs Stuff Made Here please. A welcome addition to the channel ☺️

Vor Monat
dario dal cin
dario dal cin

Hi stuff, I'm a big fan of yours from the beginning! Please never stop including the technical stuff and the actual engineering. Don't turn the channel into "science explained to kids" like mark rober

Vor 10 Tage
__Mxd__
__Mxd__

i have so much respect for youtubers like you because they will spend days and days sometimes even weeks to make stuff like this , it’s truly inspiring.

Vor 27 Tage
Elis Grahn
Elis Grahn

I've watched this three times... It is just as entertaining every time, this dude has mastered YouTube.

Vor Monat
cam
cam

This man is literally a god tier engineer, he only sees two outcomes: 1. It works 2. Try again The sheer force of will in this man is commendable

Vor Monat
Harold Seah
Harold Seah

@Patrick Herke Thank you for your considered reply. I will readily admit that complexity in and of itself cannot prove the existence of God. But I would also point out that the present model of chemical evolution/abiogenesis cannot account for the complexity of life. The chemistry involved cannot even be replicated with pure ingredients in lab conditions let alone in a pre-biotic earth. As such, to accept evolution as fact is frankly absurd in my view and the idea that we were created by an eternal God does seem on balance far more plausible.

Vor Monat
Patrick Herke
Patrick Herke

@Harold Seah Complexity really has very little to do with likelihood of intelligent design. Instead if you said that, I'd suggest that there are no known natural processes that would shape metal in such a way, however, there are many ways that and similar things are actively being made by people. (the second half with evidence for the human made explanation is really important) Thus making unlikely to happen by chance. And then ask if you had evidence suggesting such processes did exist. As for the existence of life, the broad strokes of how it propagates and evolves are reasonably well understood. And there are a number of reasonable hypotheses for how it first came to be on Earth. One of these includes the fact that amino acids have been shown to be able to form from chemicals present on Earth and atmospheric electricity. Some others center around the formation of proteins, RNA, proto-cells (which have been replicated), and metabolism first hypotheses. However, if you suggest life is complex therefore something (in your case, God) made life, you run into a problem. The assumption that something must have made life seems to indicate that complexity is necessary to create complexity. As such God must be complex. But if God is complex, how did God come to be? Thus, in introducing God to the equation, we haven't actually gotten any closer to an answer. We've just added a layer of abstraction to the problem. Most religions stop around here and say well, God's beyond our understanding, or you need to have faith, or something like that. Because most people are more comfortable with the idea that even if they don't understand how this world works, someone does and that entity can help them. Because you can pray to God, you can make sacrifices, you can persuade another intelligent being. But you can't argue with the temperature or the atmospheric pressure. You can't argue with gravity.

Vor Monat
Harold Seah
Harold Seah

@hjalar I hear you, and I used to think that as well. But consider if I said that the Nutcracker in Shane's video was made by accident even if it is clearly designed with purpose, function and intent. You would laugh at me, and point to the clear evidence of design to say someone must have made it. Surely we are more complex than a shotgun-shell actuated nutcraker, and someone must have made us. Someone who is actually God-tier for He is God.

Vor Monat
Double Dare Fan
Double Dare Fan

@Geddy V "He hits a wall" Next thing on his mind? Jackhammer! He will demolish that wall so he can move on!

Vor Monat
chris carew
chris carew

@Geddy V he doesn’t rush his videos he puts them out when they are done

Vor Monat
Eaoke3
Eaoke3

The style of montage was different! Loved to see all of the new aspects, and new video creativity

Vor Monat
Cilleyperson
Cilleyperson

This… is fantastic. How have I not been subbed to your channel before now? Keep up the amazing work!

Vor Monat
Chad Henderson
Chad Henderson

This was a cool project and glad to see you work through all of the issues that came about unexpectedly. I am wondering though, what would have happened if you were to have increased the diameter of the gas tube/chamber when the alignment was off? Would this have made any discernable difference? Either way, you successfully completed your build and had the extra bonus of spousel support and perfectly timed one liners just crushing it! Lol. Cheers

Vor Monat
Jarnick Ramm
Jarnick Ramm

You are an engineering legend, definitely a inspiration for studying engineering

Vor Monat
Craig Bush
Craig Bush

"If I waste material, it's a tragedy." Spoken like a true engineer. Man, I love this guy.

Vor Monat
James Trebillcock
James Trebillcock

Says that then scraps 5 parts off because he can't get some holes to line up lol

Vor Monat
Christian G
Christian G

while designing a maschine to waste material for no reason

Vor Monat
O Albuquerque
O Albuquerque

Said the Guy making a thermonuclear nutcracker

Vor Monat
👺samurai boi
👺samurai boi

@ticklord well i meant engineering obviously requires material cost and planning and some tests after its made.

Vor Monat
ticklord
ticklord

@John Wayne It's more of a self deprecating joke towards engineers in general. The goal is always to engineer the most efficient thing, but often with engineering, tiny mistakes cause material loss etc.

Vor Monat
Spandan Kumar
Spandan Kumar

Really appreciate the fact how you, not only explained how the project works but also gave an insight into how engineering works. Great vid as usual man. Loved it

Vor Monat
Fighter178
Fighter178

Question: could you maybe do 5 shells in something else?? I would understand that may be too expensive in metal & higher safety risk.

Vor Monat
Simon
Simon

Hey, great stuff! I’d like to take the chance to pitch to you a cool idea: remote tennis harness; two air walls with smoke in the middle and a backside projector project the adversary in front of you; the ball vel and angvel are tracked via software and a ball shooter replicates the adversary balls arriving from the other half of the field. Automatic ball boy would be a plus! Wouldn’t it be such a cool idea??

Vor 6 Tage
Tsung Hung Shen
Tsung Hung Shen

I’m impressed you are explaining your process for the design vs guesstimate. Awesome job

Vor 22 Tage
David James Henry
David James Henry

"The Big Question--" "I already married you" I know she plays a grump on this channel but every now and again she lets her love for you show and it's unironically so wholesome

Vor Monat
tiki en de marie's
tiki en de marie's

Bruh just as I started reading this comment they said that line

Vor Monat
Flashhed
Flashhed

@CS Hobo you can clearly see her smiling when she is

Vor Monat
Pietro Cavicchioli
Pietro Cavicchioli

@CS Hobo she is acting

Vor Monat
CS Hobo
CS Hobo

idk she just always looks like she really doesn't want to be here but he's paying the bills so meh.

Vor Monat
Wigglyjiggly
Wigglyjiggly

@Ashten Nicolas That is the look of someone truly in love. Sadly that is a look most of us will never receive.

Vor Monat
Talha Han
Talha Han

This is so f*cking awesome! I'm an mechanical engineering student and I can't study my finals because of your videos. I wasn't gonna study anyway, thanks Shane!

Vor 6 Stunden
Mirralis Dias
Mirralis Dias

It would be awesome seeing Shane get into Battlebots. I wonder what kind of destructive bot he would make

Vor Monat
Marshall White
Marshall White

The way you assembled this really reminds me of the little hydraulic motors I use at work

Vor Monat
MountainMan
MountainMan

Love the calculations, and the design/testing cycle! Warms this engineers heart.

Vor Monat
AHappyKid
AHappyKid

Like they say: Physics is math with the universe’s limitations, and engineering is physics with a budget.

Vor Monat
Avram42
Avram42

@MsKitt The budget is approximated as a sphere with a radius of $; Unfortunately it was a cube with a wall length of $, misestimating the total volume by a factor of ~2.

Vor Monat
Brandon I
Brandon I

@doe maeries I see you shop on Amazon!

Vor Monat
doe maeries
doe maeries

@Serban C. Musca Security factor 0.9

Vor Monat
lacaulac
lacaulac

@Dio Brando Mostly error, maybe

Vor Monat
MsKitt
MsKitt

@B3 Dubbs assumptions are the only thing that fit in the budget

Vor Monat
o_sch
o_sch

Ive noticed a lot of new editing in this video. Your videos are just getting better and better

Vor Monat
H Todd
H Todd

Having cams and rails on a moving part helps stabilize mass moving abruptly and can make moving parts last longer, think of a slide on a handgun or a log splitter shaft.

Vor Monat
Larry Brandt
Larry Brandt

I loved this project! Re safety though, would that chipboard that you were hiding behind really help at all if something went wrong??

Vor Monat
omniwing
omniwing

Powder actuation is now my new favorite thing! Omgosh keep making stuff like this!

Vor 4 Tage
David Saska
David Saska

This guy is one of the most impressive engineers I’ve ever seen. The breadth of knowledge is ridiculous, and his ability to distill that into something accurate but understandable for us YouTube plebes is unmatched.

Vor Monat
placidesulfurik
placidesulfurik

@Azmi Maulana Hamdani I can, but that's beside the point.

Vor Monat
Doot•1 year ago
Doot•1 year ago

This guy and styropyro

Vor Monat
RUBE
RUBE

@OperatorSenko YOOOO XD

Vor Monat
OperatorSenko
OperatorSenko

@𝕵 𝕾 "ignorami" lol. If I ever wanna kill myself I'll jump off your ego

Vor Monat
BOB Fake
BOB Fake

@𝕵 𝕾 How arrogant can u get holy hell. Not only doesnt the youtuber you like to watch neccessarily correlate to your intelligence but applied science isnt even on the level of advanced undergrad experimental courses in physics lol

Vor Monat
John Rhose
John Rhose

Love it. It's so badass. I'm also hoping to see a mechanical vehicle or bike powered by those shells.

Vor Monat
ColdWheels
ColdWheels

I love this channel man you make REALLY good videos

Vor Monat
B-Dank Lynrel
B-Dank Lynrel

Ahhh firearms engineering. You've discovered why modern rifles moved to rotating bolt faces with locking lugs! Really cool to see these concepts in a new light!

Vor Monat
Cheems
Cheems

Chamber pressure is too high. Problem also may be dwell time between the piston being pushed up and gas being let out through the gasport before it has pushed the piston with enough power

Vor Tag
JL2579
JL2579

This nut buster probably has more crushes than anyone else in the world. I am in love with it, too! Brilliant video as always!

Vor Monat
JL2579
JL2579

@Raúl Albañil thanks :)

Vor Monat
Jakson Duimstra
Jakson Duimstra

YOOOO i havent seen you active in ages, glad to see ur alive -one of ur viewers, active mc redstoner

Vor Monat
Juanit0Tackit0 Tackito
Juanit0Tackit0 Tackito

Trust in Jesus Christ

Vor Monat
the dot giver
the dot giver

°

Vor Monat
MegaTurtle27
MegaTurtle27

Nut buster

Vor Monat
WrathMachine
WrathMachine

With the .22 blanks they're tapered to a 5mm neck to avoid the body splitting away from the rim. The .25, .27 and .32 cals are not tapered but I'm sure that the chamber is to avoid splittings. So if the shell is 6.35mm in dia the bore of the chamber is going to be smaller so 6mm or even lower.

Vor Monat
Martin IV
Martin IV

Could, harder, or composite material help reduce thickness of the wall of nutcracker from steel? :)

Vor Monat
PurpleNinja 82802
PurpleNinja 82802

This reminds me of when I built a cannon/mortar out of some scrap aluminum using only a drill press and some vice grips. Shot golf balls using M-80 charges, possibly the stupidest thing I ever did and I’m lucky no one got hurt :)

Vor Monat
Amaroq Starwind
Amaroq Starwind

You should use triangular / hexagonal packing. You might get more even distribution of force that way.

Vor Monat
Cristian D63
Cristian D63

Really enjoying the increase of Wife's dialogue in these episodes she seems to have a lot of character development since the last offspring DLC

Vor Monat
Max Goldstein
Max Goldstein

@yochillll Honestly.. the devs really nailed every aspect

Vor Monat
yochillll
yochillll

Honestly its the mocap for me. Its so amazing, human like movement and words seem to be more articulative.

Vor Monat
Max Goldstein
Max Goldstein

This dialog patch is really hype tbh, honestly surprised it wasn't a micro transaction

Vor Monat
Electric_Bagpipes
Electric_Bagpipes

Any death flags or betrayal flags yet?

Vor Monat
Bram
Bram

Stuffmadehere V2021.12 Last Offspring Patch Notes: - Added character models for armor vest wife and hard hat wife - Fixed a bug where the wife would always use the same set of dialoges

Vor Monat
Zafaraa
Zafaraa

The editing shocked me, very nice and upgraded from previous episodes

Vor Monat
Julius Mason
Julius Mason

Since you’re using blank cartridges with a muffler (essentially a suppressor), were you afraid someone would think it was an NFA item and report you to the police/ATF?

Vor Monat
larrybud
larrybud

I would think there's an issue with each shell firing at slightly different times which is also reducing performance. Also, that OSB isn't protecting you from anything. lol

Vor Monat
Ryan Berry
Ryan Berry

I am so unreasonably jealous of the fact that you just casually have a machine shop to rival my college (tech focused college, and i'm in the engineering school) machine shop.

Vor 29 Tage
Switch & Lever
Switch & Lever

You could easily make a whole new YouTube series with this, "Will it crush!?", maybe dress it up with bunny ears around Easter!

Vor Monat
Shaggy7258
Shaggy7258

@Riley Sinclair this guy isnt suggesting he stop the content he does now he's just saying it could be a successful side venture...you know like when he says its hard to pay for these projects sometimes? Bam. Diversified

Vor Monat
Switch & Lever
Switch & Lever

Shina because being negative and putting people down for what they watch isn’t virtue signaling? 😂 If you think making comments on other people’s videos gets you subscribers then you have fundamentally misunderstood how YouTube works. Still can’t understand why someone would choose to be negative about everything though. Does it make anything in your, or other’s, life better?

Vor Monat
Shina
Shina

@Switch & Lever Stop virtue signalling to get subscribers.

Vor Monat
Switch & Lever
Switch & Lever

@Shina aww, imagine coming to YouTube and the first thing you think about is to put others down for what they choose to watch. I don't know about you, but I prefer to support and build people up than to be negative and put them down 🤷‍♂️

Vor Monat
Shina
Shina

yes for the brain dead tisms to sit there and digest mindless content while they rot away

Vor Monat
Miss Informed
Miss Informed

The bridges in Germany were very well engineered by those standards. Then the amount of haulers vastly exceeded the long term estimates.

Vor 23 Tage
Tim Desmond
Tim Desmond

I'd love to see you make something to send objects at or above super sonic speeds.....

Vor Monat
TheOpticalFreak
TheOpticalFreak

Your wife actually has a really good sense of humor! 🤣👍😆

Vor Monat
r.e.l ariel shabat
r.e.l ariel shabat

You’re awesome man i think you are too smart for this project’s you need to solve some of the world bigger problems haha keep it up

Vor Monat
smartpig555119
smartpig555119

Shane really is out here showing us exactly what youtube was made for every month, quickly becoming my favourite engineering channel by far! Thanks so much Shane! Happy holidays!

Vor Monat
👺samurai boi
👺samurai boi

I thknk we all should call him stuff since its alot more easier.

Vor Monat
alex39082
alex39082

Pretty sure his name is “Stuff”… not sure where you got Shane from.

Vor Monat
B3 Dubbs
B3 Dubbs

@Lil Driz i love it. It’s pretty much practical problem solving and you can do so much with it. Very math intensive, but I did poorly in math before I got into it and pretty much brute forced from college algebra to cal 2 with YouTube videos and made all A’s. If I can do you, you can do it too!

Vor Monat
Lil Driz
Lil Driz

@B3 Dubbs how do you like it? 15 and it really interests me but idk if that's what I'd want to spend the rest of my life on

Vor Monat
B3 Dubbs
B3 Dubbs

As an engineering student I love how into detail he goes. Better than some of my teachers lol

Vor Monat
Jason Bourne
Jason Bourne

I thought this was gonna be a .50 cal nutcracker gun. Either way I'm impressed

Vor Monat
T C - Blade Of Grass
T C - Blade Of Grass

So, I had an idea the other day for something I think you could make. An umbrella drone..... It could have a camera that tracks your head position and remains centred above your head as you walk along, but keeping your hands dry in your pockets. Other features, it could sense on coming objects and people and raises it's height to clear other people bit still keeping you dry. Also it would be cool if it could detect 2 people walking side by side and then centre it's self between the pair to keep 2 people dry. Feels like it has all of the engineering and software challenges which you love

Vor 6 Tage
Somewhat Obsessed with Gaming
Somewhat Obsessed with Gaming

Was sonic choke flow an issue in designing this? Your math to model certainly met your expectations, but I am curious about the whole four shells one flow chamber to piston thing.

Vor 28 Tage
oldschoolman 144
oldschoolman 144

It will be interesting to ask your children in twenty years what it was like growing up with a mad scientist father. =)

Vor 7 Tage
PNW Perspective
PNW Perspective

Shane: “alright, the big question.” The wife: “I already married you.” Shane: *rolls eyes*

Vor Monat
Matt Raerth
Matt Raerth

This is up there with: Shane: "This might be my favourite thing I've ever created" Wife: "We have a daughter..."

Vor Monat
romxxii
romxxii

He doesn't even roll his eyes. His immediate response is rapid eye-blinking, which is more like "I want to say something clever in response but I don't want to sleep on the couch tonight"

Vor Monat
Samuel Gabura
Samuel Gabura

A Christmas sweater with metal nuts could be nice, just ideas to keep it festive. But I understand it's too late for such an awesome idea.

Vor Monat
Victoria Anabella Hernández Canela
Victoria Anabella Hernández Canela

The hexagon shape is the most resisting shape used in big constructions , so that would have help that the nut doesn’t crack

Vor Monat
Something Pickles
Something Pickles

I guess there are two kinds of people, those who do calculations, and those that make it 3x thicker than they think it needs and test it from 100 feet away.

Vor Monat
Josh Haughton
Josh Haughton

I'd love to be your apprentice just to learn how to use all those cool toys.

Vor Monat
Ben Gallaty
Ben Gallaty

"The big question..." "I already married you." She's absolutely a keeper, both the wife and I got a laugh out of her joke.

Vor Monat
Selection
Selection

@theunprofessionals should be at 18:59

Vor 11 Tage
UEE Hurston Security
UEE Hurston Security

@Nunya Beeswax check in the video, i think that part was in this video, wait no it might have been the lock picking one. nvm its this one. yea its this video

Vor 24 Tage
Nunya Beeswax
Nunya Beeswax

@theunprofessionals it's probably around 19:00

Vor Monat
RandomImpluses
RandomImpluses

Best joke of the video!

Vor Monat
BurgerBurglar
BurgerBurglar

@theunprofessionals It should be at 19:08

Vor Monat
MrSlimshady649
MrSlimshady649

Your wife is a good sport! Your a lucky man. Keep her happy

Vor 22 Tage
Chintam
Chintam

I would watch videos of you machining a part from start to finish and nothing else.

Vor Monat
Declan Ryle
Declan Ryle

found this dude at around 300k and now he’s already tenfold that, WILD!

Vor Monat
Jsp
Jsp

Next make an guitar/bass pedal box that has all the effects in one. Or a circuit bending box that makes interesting sounds.

Vor 3 Tage
Bigg Mack The Wack Slack
Bigg Mack The Wack Slack

"Now for the big question..." *"I already married you. :P"* MY GOD your wife has good comedic timing.

Vor Monat
Bill B
Bill B

I have a theory she's the brains of the operation.

Vor Monat
ArticticcBlu
ArticticcBlu

@Finn Eh thanks

Vor Monat
Finn Eh
Finn Eh

19:10 for anyone who missed it. Pure gold

Vor Monat
Philip Horger
Philip Horger

Honestly, 2 deadpan geniuses sounds like it shouldn't work, but they play off each other so well, and find other axes of contrast. Effin' brilliant.

Vor Monat
PikaDJ
PikaDJ

he stuttered a bunch its adorable

Vor Monat
Flamangone
Flamangone

I would like to see this against a prince ruberts drop ( those hard glass drops that can resist a bullet)

Vor Monat
larrybud
larrybud

4:50, re yield strength. What role do the threads have to play in the yield strength? Are they the weak link, or are they designed so they are stronger than the bolt in general?

Vor Monat
Is it wrong To question
Is it wrong To question

Smartest YouTuber ever! This man is a master of so many different fields.

Vor Monat
Rik Vermeer
Rik Vermeer

Youtube hero, there should be a grand prix for you, and others. So amazing.

Vor Monat
Our Zoe
Our Zoe

Him: “The big question” Wife: “I already married you” This had me dying!!🤣

Vor Monat
Crab Spriteberry
Crab Spriteberry

@Nautilus Guitars B A N G E R

Vor Monat
Taiyana
Taiyana

@ABHAY KUMAR 71 thank

Vor Monat
ABHAY KUMAR 71
ABHAY KUMAR 71

19:10

Vor Monat
Nautilus Guitars
Nautilus Guitars

Yeah, that was a banger line haha. Those two are adorable. I love it.

Vor Monat
Kurt Eugenie
Kurt Eugenie

its so cuteeeee

Vor Monat
Ayden Nuula
Ayden Nuula

This is way more educational and layman friendly than your usually explody high jnks. I love it.

Vor Monat
Alexander Howard
Alexander Howard

For anyone interested the method of looking at tiny parts in that way to gain insight into the larger system it is called finite element analysis

Vor Monat
Skely
Skely

I like how it’s just a gun strapped to a piston we just don’t wanna call it that 😂

Vor Monat

Nächster

Trying to paint a GIANT wall with a robot

23:24

Trying to paint a GIANT wall with a robot

Stuff Made Here

Aufrufe 5 100 000

Explosive Bat: crushing MLB records. Ft: Smarter Every Day

24:56

Automatic pool stick vs. strangers

21:19

Automatic pool stick vs. strangers

Stuff Made Here

Aufrufe 17 000 000

Eating At The WORST Rated Restaurant in NYC

18:26

PRIME Drink Did This To My Training!

9:53

A "better" hair cutting machine

21:43

A "better" hair cutting machine

Stuff Made Here

Aufrufe 4 500 000

Auto-aiming bow vs. FLYING targets

17:36

Auto-aiming bow vs. FLYING targets

Stuff Made Here

Aufrufe 10 000 000

Fixing a little mess with a big mess

19:39

Fixing a little mess with a big mess

Stuff Made Here

Aufrufe 2 700 000

See in complete darkness with touch

14:13

See in complete darkness with touch

Stuff Made Here

Aufrufe 5 000 000

How I made steel toe crocs with wood

24:15

How I made steel toe crocs with wood

Stuff Made Here

Aufrufe 7 100 000

Pushing the explosive bat to its limit

17:47

Pushing the explosive bat to its limit

Stuff Made Here

Aufrufe 5 700 000

My most dangerous robot

22:28

My most dangerous robot

Stuff Made Here

Aufrufe 5 600 000

TWO Unpickable (?) Locks for Lock Picking Lawyer!

14:40

Die Zukunft des Smarthomes kommt in dein Zuhause

22:31

This is the COOLEST Art

0:34

This is the COOLEST Art

Surfnboy Shorts

Aufrufe 1 424 125

Is Samsung too LATE?!? - Galaxy S21 FE

11:24

Is Samsung too LATE?!? - Galaxy S21 FE

ShortCircuit

Aufrufe 355 095